Trusted by Ontario municipalities, utilities and rail operators.
Fused On Site. Not Trucked In.
We fuse HDPE and weld steel casing right where the pipe goes in, so your pull never waits on someone else’s shop.
Strings built at the job.
Long strings are fused and staged beside the bore, ready to pull as soon as the hole is. No shop turnaround and no transport limit on string length.
No mechanical
joints, no leak
points.
Butt fusion turns separate lengths into one continuous pipe. The fused joint is as strong as the pipe wall, which is why it’s specified for pressure mains and anything going under a road or river.
Steel casing welded
in the field.
Rail and highway crossings often require steel casing. We weld it where it’s going in, not in a shop three hours away.
The whole job stays
in-house.
We drill, fuse, weld and install. One crew, one schedule, and one point of contact when something changes.
Small or large, one
contractor.
From a 2" service line to a 48"+ trunk main. Small jobs don’t get turned down and big ones don’t get subbed out.
Certified operators.
A fusion is only as good as the operator and the parameters. Our operators are certified, and every joint is recorded.
What We Fuse
and Weld
HDPE and steel for water, sewer, conduit and
crossings, from a 2" service line to a 48"+
trunk main.
Water Mains & Services
HDPE distribution mains and service lines, butt-fused into continuous strings that hold pressure without gaskets or mechanical couplings.
Sanitary & Forcemain
Pressurized forcemain and gravity sewer in fused HDPE. No gasketed joints means no infiltration and no root intrusion at the joints.
Telecom & Fibre
HDPE conduit for fibre and data builds, joined into the long continuous runs these projects need and staged ready for the pull.
Hydro & Power Duct
Primary and secondary duct for hydro and power distribution, fused in the diameters and wall thicknesses the utility specifies.
Rail & Highway Casing
Steel casing welded on site for rail and highway crossings, with the fused carrier pipe installed inside it.
Geothermal Loops
Supply and return lines for horizontal loop fields, fused into sealed, continuous circuits.
Our Fusion and Welding Services
Butt fusion and field welding from 2" to 48"+, on our
own bores or as a subcontract on yours.
Our Blogs
Latest insights, updates, and stories.
Nitika Sharma
Request a Quote
Tell us about the job. An estimator will get back to you within one business day.
-
Call us (705) 327-2751
-
Email us info@ccunderground.ca
Send us your project details
Something Broke. We'll Be There Today
Watermain breaks, utility strikes, spills and washouts don't wait for business hours. Crews across Central Ontario mean we mobilize the day you call, with MOECP-registered spills response and operators who've handled it before.
Request a QuotePipe Fusion FAQs
Everything you need to know about our services, emergency response, and project timelines.
Yes. CC Underground performs HDPE pipe fusion directly at the job site. Pipe sections can be assembled and staged for pullback or installation, helping keep fusion and installation on the same project schedule.
CC Underground can fuse HDPE pipe from 2 inches to 48 inches and larger, depending on the project requirements and available equipment. This covers applications ranging from smaller service connections to large-diameter trunk mains.
Yes. Our fusion technicians are certified and work with calibrated fusion equipment. Proper pipe preparation, equipment settings and fusion procedures are followed according to applicable project specifications and standards.
Yes. We can fuse HDPE pipe strings to the required length for HDD pullback. This allows the pipe to be prepared and staged in advance so the fusion work is coordinated with the drilling schedule.
Yes. CC Underground provides on-site fusion services for contractors that require certified fusion technicians or specialized equipment. We can work with your project schedule and installation requirements.
Yes. CC Underground can perform field welding of steel casing for applications such as rail and highway crossings, where site conditions and project specifications require it.
CC Underground provides on-site HDPE pipe fusion services across Ontario, including the GTA and Simcoe County, with service areas including Toronto, Mississauga, Brampton, Vaughan, Markham, Barrie, Orillia, Innisfil and Collingwood.